Worker scraping loose plaster off a pool wall below the waterline tile

Pool resurfacing · Buckeye, AZ

Pool resurfacing in Buckeye, AZ

Your Buckeye pool surface is pitted, faded or catching on bare feet? Tell us about your pool, and someone from our team will call you back to go over your finish options and the price.

Get a call back Call (747) 243-2089

See price ranges

Plaster, quartz or pebble style
Priced in writing first
Buckeye, AZ

Good to know

Pool finishes for Buckeye

When a Buckeye pool is ready for a new surface, the finish choice drives both the look and the lifespan. Hard water can leave scale on a pool finish. The City of Phoenix 2025 Water Quality Report (opens in a new tab) lists tap water hardness of 172 to 302 ppm (10 to 17.6 grains per gallon), and hardness differs by city and water source, so a Buckeye tap can read higher or lower. The options include:

Not sure which finish fits? Send the form, and someone from our team will call you back to go over it with you.

Costs

What resurfacing costs in the Phoenix metro

A national 2026 cost guide puts pool resurfacing at $6,000 to $15,000 for most homeowners, averaging about $11,000. Arizona figures from a 2026 pool cost guide run $6,000 to $10,000 for standard plaster and $9,000 to $16,000 for a pebble style finish. Published 2026 cost data for the Phoenix metro lists the average pool remodel at $9,331, with most homeowners paying $5,732 to $12,976. A Buckeye pool's final number depends on its size, its current condition and the finish you pick. The same national guide lists repainting at about $1,500 per 1,000 square feet, replastering at about $5,500 per 1,000 square feet, resurfacing with aggregate at about $6,500 and tile refinishing at about $30,000 per 1,000 square feet. Before the new finish goes on, it puts draining at about $175 to $225, cleaning at about $250 and refilling at about $55 per 5,000 gallons.

Gloved hands pressing a blue waterline tile into place along a pool wall

Signs

Signs your Buckeye pool surface is worn out

The finish often shows wear before it fails completely:

Rough or pitted plaster underfoot.
Discoloration that brushing will not remove.
A chalky or dusty feel on the walls.
A calcium line that keeps returning at the waterline.

When these pile up, the finish may have thinned enough to need a resurface. A national 2026 cost guide lists flaking plaster, surface stains and discoloration among the signs.

What you get

What you get when you request a callback

A clear look at the finish options and their tradeoffs.
A rough budget range before anything is scheduled.
A written plan and price before work starts.
A finish matched to your pool's size and condition.

How it works

How the process works

You describe your pool, the finish you have now, and what is wrong with it. We call you back and go over the finish options, a rough budget and the timing. Then you get a plan and a price in writing before anything is scheduled or any work starts.

3 questions

Questions people ask

Still have a question? Call (747) 243-2089 and say what your pool is doing.

Which finish lasts longest in Buckeye?

A 2026 Arizona pool cost guide puts a pebble style finish at 15 to 25 years in Arizona and plaster at 10 to 15 years, so pebble is the longer lasting of the two common options.

When is monsoon season in the Valley?

Monsoon season runs June 15 through September 30, per the National Weather Service (opens in a new tab), and it reaches the entire Valley including Buckeye.

How do I know my pool is ready for a resurface?

Rough or pitted plaster, a chalky feel, and calcium rings at the waterline are common signs. A Phoenix pool cost guide says a concrete pool should be resurfaced about every 10 years.

Keep reading

Service area map

Buckeye and the towns around Phoenix

All service areas

Open in Google Maps