Deep blue waterline tile under a stone coping along a pool, mountains behind

Pool resurfacing · Fountain Hills, AZ

Pool resurfacing in Fountain Hills, AZ

Your Fountain Hills pool finish looks dull and chalky, and you want your options and a price? Tell us about your pool, and someone from our team will call you back to plan it.

Get a call back Call (747) 243-2089

See price ranges

Plaster, quartz or pebble style
Priced in writing first
Fountain Hills, AZ

Good to know

Finish options for Fountain Hills pools

For a pool in full sun, the finish choice is largely a durability decision. Hard water can leave scale on a pool finish. The City of Phoenix 2025 Water Quality Report (opens in a new tab) lists tap water hardness of 172 to 302 ppm (10 to 17.6 grains per gallon), and hardness differs by city and water source, so a Fountain Hills tap can read higher or lower. The options include:

Send the form, and someone from our team will call you back to plan it.

Costs

Resurfacing costs in the Phoenix metro

According to a national 2026 cost guide, most homeowners pay $6,000 to $15,000 for pool resurfacing, with an average of about $11,000. In Arizona, a 2026 pool cost guide lists standard plaster at $6,000 to $10,000 and a pebble style finish at $9,000 to $16,000. For the Phoenix metro, published 2026 cost data puts the average pool remodel at $9,331, and most homeowners pay $5,732 to $12,976. A Fountain Hills pool's final number depends on its size, its current condition and the finish you choose. The national guide also breaks cost out by finish: about $1,500 per 1,000 square feet for repainting, about $5,500 per 1,000 square feet for replastering, about $6,500 for resurfacing with aggregate and about $30,000 per 1,000 square feet for tile refinishing. Draining runs about $175 to $225, cleaning about $250, and refilling about $55 per 5,000 gallons.

Gloved hands pressing a blue waterline tile into place along a pool wall

Signs

Signs a Fountain Hills pool is due for a resurface

The surface usually gives clear signals before it fails outright:

Plaster that feels rough or pitted.
Staining that brushing no longer removes.
A chalky or cloudy feel to the finish.
A white calcium line that persists at the waterline.

When these show up together, the finish may be worn enough to replace. A national 2026 cost guide lists a rough plaster surface, surface stains and discoloration among the signs a pool needs resurfacing.

What you get

What you get when you request a callback

A clear run through the finish options and their lifespans.
A rough budget range up front.
A plan and a price in writing before anything is scheduled.
A finish matched to your pool's size and sun exposure.

Good to know

What to expect when you call

You tell us about your pool, the finish you have now, and what is wrong with it. We call you back and go over the finish options, a rough budget and the timing. Then you get a plan and a price in writing before anything is scheduled or any work starts.

3 questions

Questions people ask

Still have a question? Call (747) 243-2089 and say what your pool is doing.

Which finish holds up under Fountain Hills sun?

A 2026 Arizona pool cost guide puts a pebble style finish at 15 to 25 years in Arizona and plaster at 10 to 15 years, and it says intense UV and hard water make plaster fail faster here than in milder climates.

When should I schedule around the monsoon?

Some homeowners schedule outside the monsoon window, which runs June 15 through September 30 per the National Weather Service (opens in a new tab), since weather can slow an outdoor job.

How often do concrete pools need resurfacing?

A Phoenix pool cost guide says a concrete pool should be resurfaced about every 10 years, and a national 2026 cost guide gives a plaster finish a lifespan of about 10 years.

Keep reading

Service area map

Fountain Hills and the towns around Phoenix

All service areas

Open in Google Maps