Estimator · Phoenix, AZ
The Phoenix pool resurfacing cost estimator
3 quick questions build a low to high pool resurfacing cost range for your Phoenix pool, based on published 2026 pool cost data. It is an estimate, not a quote. The final price depends on an on-site visit.
3 step estimate
Answer 3 questions, see your range
Your estimated range
$8,900to$11,650
Estimate only. The final quote depends on an on-site visit.
- PoolMedium, 450 to 600 sq ft
- FinishQuartz aggregate
- SurfaceLight prep
- Add-onsNone
Acid wash: ask us when we call you back.
Built from published 2026 Arizona pool resurfacing ranges (plaster $6,000 to $10,000, pebble style $9,000 to $16,000). Quartz, the chip-out and the add-on bands are reasoned estimates, not published rates.
How it works
Step 1: Pool size
Pick the closest match, or enter your exact square footage if you know it.
| Size | Typical gallons | Typical surface area |
|---|---|---|
| Small | 10,000 to 15,000 gallons | 300 to 450 sq ft |
| Medium | 15,000 to 20,000 gallons | 450 to 600 sq ft |
| Large | 20,000 to 30,000 gallons | 600 to 900 sq ft |
Not sure? A 20,000 gallon residential pool lands in the medium band above.
How it works
Step 2: Finish
- Plaster, usually the lowest upfront cost, white or tinted.
- Quartz aggregate, more color and texture than plain plaster.
- Pebble style, the most textured and longest lasting of the three.
How it works
Step 3: Condition and add-ons
- Light prep (standard resurface) or full chip-out (the old finish is removed down to the shell, adds an estimated 20 percent to material and labor cost).
- Add-ons, as estimates: waterline tile ($2,500 to $6,000) and coping ($1,500 to $4,000). Acid wash: ask us when we call you back.
Costs
Your estimated range
| Finish | Material rate | Typical pool (450 sq ft, light prep) |
|---|---|---|
| Plaster | about $5.50 per sq ft | roughly $2,475 material + labor + $450 drain/clean/refill |
| Quartz (estimate) | about $7.75 per sq ft | roughly $3,488 material + labor + $450 drain/clean/refill |
| Pebble style | about $10 per sq ft | roughly $4,500 material + labor + $450 drain/clean/refill |
Labor runs $45 to $65 per hour on top of material cost, in national 2026 cost data. A full chip-out adds an estimated 20 percent to the material and labor total. Add an estimated $2,500 to $6,000 for waterline tile or $1,500 to $4,000 for coping if you want either included. For comparison, a 2026 Arizona pool cost guide puts a whole plaster resurface at $6,000 to $10,000 and a pebble style resurface at $9,000 to $16,000.
Estimate only. The final quote depends on an on-site visit.
Sources: the plaster and pebble material rates fall within the per-square-foot figures in national 2026 cost data and a 2026 Arizona pool cost guide. The labor rate is the midpoint of the national $45 to $65 per hour, and the $450 drain, clean and refill figure is the midpoint of the national $425 to $475. The Arizona guide's whole-job figures are plaster $6,000 to $10,000 and pebble style $9,000 to $16,000. The chip-out multiplier and the tile and coping bands are estimates, not published rates. Quartz has no published price, so its per-square-foot rate is an estimate placed midway between plaster and pebble.
See the full published cost breakdown by size and finish for the underlying tables, or compare plaster, quartz and pebble side by side.
3 questions
Questions people ask
Still have a question? Call (747) 243-2089 and say what your pool is doing.
Is this estimator a real quote?
It is a range built from published cost data, for planning only. A written price comes after your pool has been seen in person.
Why is there a range instead of one number?
Pool shape, access, current condition and exact finish choice all move the final price. A range reflects that; a single number from a form could not.
What do I do after I get my range?
Call (747) 243-2089 or send the form, and someone from our team will call you back to go over your pool and plan the next step.
