Deep blue waterline tile under a stone coping along a pool, mountains behind

Pool resurfacing · Tolleson, AZ

Pool resurfacing in Tolleson, AZ

Your Tolleson pool walls feel rough and the stains will not brush out? Tell us about your pool, and someone from our team will call you back to plan the resurfacing and a budget.

Get a call back Call (747) 243-2089

See price ranges

Plaster, quartz or pebble style
Priced in writing first
Tolleson, AZ

Good to know

Pool finishes for Tolleson

When a Tolleson pool is ready for a new surface, the finish choice sets both the look and how long it lasts. Hard water can leave scale on a pool finish. The City of Phoenix 2025 Water Quality Report (opens in a new tab) lists tap water hardness of 172 to 302 ppm (10 to 17.6 grains per gallon), and hardness differs by city and water source, so a Tolleson tap can read higher or lower. The options include:

Send the form, and someone from our team will call you back.

Costs

What resurfacing costs in the Valley

A national 2026 cost guide puts pool resurfacing at $6,000 to $15,000 for most homeowners, averaging about $11,000. Arizona figures from a 2026 pool cost guide run $6,000 to $10,000 for standard plaster and $9,000 to $16,000 for a pebble style finish. Published 2026 cost data for the Phoenix metro lists the average pool remodel at $9,331, with most homeowners paying $5,732 to $12,976. A Tolleson pool's final figure depends on size, condition and the finish you pick. The same national guide lists repainting at about $1,500 per 1,000 square feet, replastering at about $5,500 per 1,000 square feet, resurfacing with aggregate at about $6,500 and tile refinishing at about $30,000 per 1,000 square feet. For prep, it puts draining at about $175 to $225, cleaning at about $250 and refilling at about $55 per 5,000 gallons.

Gloved hands pressing a blue waterline tile into place along a pool wall

Good to know

How to tell when a Tolleson pool needs resurfacing

The finish tends to give notice well before it fails:

Rough spots that catch on feet and hands.
Stains that brushing will not lift.
A chalky residue on the walls.
A calcium line that re-forms after cleaning.

A few of these together can mean the surface has thinned and is due for a new finish. A national 2026 cost guide lists flaking plaster, surface stains and a rough plaster surface among the signs a pool needs resurfacing.

What you get

What you get when you request a callback

A walk through the finish options and what each costs.
A rough budget range before anything is scheduled.
A written plan and price before work starts.
A finish matched to your pool's size and condition.

How it works

You describe your pool, the finish you have now, and what is wrong with it. We call you back and go over the finish options, a rough budget and the timing. Then you get a plan and a price in writing before anything is scheduled or any work starts.

3 questions

Questions people ask

Still have a question? Call (747) 243-2089 and say what your pool is doing.

What finish is the most affordable for a Tolleson pool?

Of plaster, quartz and pebble style, white plaster has the lowest upfront cost. A 2026 Arizona pool cost guide puts plaster at $6,000 to $10,000, against $9,000 to $16,000 for a pebble style finish.

When is monsoon season in the Valley?

Monsoon season runs June 15 through September 30, per the National Weather Service (opens in a new tab), and it reaches the entire Valley including Tolleson.

How long does a plaster finish last here?

A 2026 Arizona pool cost guide puts plaster at 10 to 15 years in Arizona and a pebble style finish at 15 to 25 years.

Keep reading

Service area map

Tolleson and the towns around Phoenix

All service areas

Open in Google Maps