Service 01 of 04 · Phoenix, AZ
Pebble pool resurfacing in Phoenix, AZ
Your plaster keeps wearing out in Phoenix sun and hard water, and you want a pebble style finish that lasts longer? Tell us about your pool, and someone from our team will call you back to plan it.
See price ranges- Pebble pool resurfacing
- Priced in writing first
What you get
What you get with a pebble style finish
When you pick a pebble style resurface for your Phoenix pool, here is what changes:
- A textured surface of small, worn smooth pebbles set in colored cement, applied to the shell of your pool
- A finish that can last longer than white plaster in desert heat, so you may resurface less often
- A textured feel underfoot that some owners like for grip around steps and benches
- A natural, mottled look that can hide the calcium scale and etching hard Phoenix water leaves behind
- A call back to go over pebble style options, the budget and the timing for your pool
5 steps
5 signs your pool is ready for a pebble style resurface
Your pool tells you when the current surface is done. Watch for these:
White plaster that has worn thin in patches, with the gray shell showing through
Rough spots that scrape feet, knees and swimsuits instead of feeling smooth
Stains and white scale that brushing and an acid wash no longer lift
Cracks or hollow areas where the old finish has separated from the shell
The surface is past the 10 to 15 year mark that plaster typically lasts in Phoenix
If you check off 2 or more of those, the surface may be ready for a new finish. A pebble style finish is one upgrade that can cut down on frequent replastering.
3 steps
How the process works
Tell us about your pool. Size, current finish if you know it, and what is wrong with it.
We call you back. Someone goes over the pebble style finish options, the rough budget and the timing with you.
You get a plan and a price in writing before anything is scheduled or any work starts.
Costs
What a pebble style resurface costs in Phoenix
A 2026 Arizona pool cost guide puts a pebble style finish at $9,000 to $16,000 per pool, with a life of 15 to 25 years. A national 2026 cost guide puts resurfacing with aggregate at about $6,500 per 1,000 sq ft and labor to refinish a pool at $45 to $65 per hour. Draining the pool runs about $175 to $225, cleaning about $250, and refilling about $55 per 5,000 gallons.
The 2026 national average for pool resurfacing is $11,000, with most homeowners paying $6,000 to $15,000. A national 2026 cost guide's size table runs from about $320 for a 6 by 8 ft pool up to $5,200 for a 20 by 40 ft pool, so pool size is one of the most direct cost drivers.
For a full breakdown by pool size and finish type, read what pool resurfacing costs in Phoenix, or run the pool cost estimator for a range built around your own pool.
What you get
Why a pebble style finish holds up in Phoenix
City of Phoenix tap water is hard, measured at 158 to 344 ppm in the city's 2024 water quality report. That calcium can settle onto pool surfaces as scale, and paired with year round UV it can wear a soft plaster surface down faster than in a milder climate. A pebble style finish puts a layer of stone between that water chemistry and your shell, and a 2026 Arizona pool cost guide says it holds up better to the UV and hard water here.
Monsoon season runs June 15 through September 30. The dust and debris it can blow into pools may settle on the surface. A textured pebble style finish can hide that wear better than a smooth white surface.
Pebble finish
Pebble style versus plain plaster
The choice usually comes down to upfront cost against how long the surface lasts. Plaster costs less up front, $6,000 to $10,000 in Arizona, but its life runs 10 to 15 years. A pebble style finish costs more up front, $9,000 to $16,000, but stretches to 15 to 25 years, so the cost per year can work out lower over 2 cycles of plaster. For a Phoenix homeowner planning to stay put, that math can be the deciding factor, while someone who may sell soon might lean toward plaster. See the full side by side in our plaster, quartz or pebble comparison.
Pebble finish
Choosing the look of your pebble style finish
Pebble style finishes come in a wide tone range, from pale sand and tan through mid grays and blues to near black, with the pebbles showing through the colored cement. The tone you pick changes how the water reads and how much heat the surface absorbs. Darker tones can hide scale well and may hold a little warmth into the evening, while lighter tones can keep the water cooler and the pool brighter. Tell us the look you want, and someone from our team will call you back about your project. The pebbles stay visible in every tone, so the surface reads as natural stone rather than a flat painted color.
How it works
What the job involves
A pebble style resurface is more than a coat of paint. The pool is drained, the old surface is chipped out or prepped so the new layer can take, the pebble and cement mix is applied to the shell and troweled smooth, and the pool is refilled and balanced. Concrete pools are generally resurfaced on a roughly 10 year cycle, so a finish that can last 15 to 25 years may skip the next cycle, which is one reason some Phoenix owners pay more for it up front. The written plan you get before anything starts lays out the full sequence and timing for your pool, including the drain, clean and refill steps and their cost. Draining runs about $175 to $225, cleaning about $250, and refilling about $55 per 5,000 gallons, so the prep and water costs are a real part of the total.
6 questions
Questions people ask
Still have a question? Call (747) 243-2089 and say what your pool is doing.
Is a pebble style finish worth the extra cost over plaster?
It can be. Plaster runs 10 to 15 years and a pebble style finish runs 15 to 25 years, so the higher upfront cost of $9,000 to $16,000 can mean one resurface instead of two over the same stretch of years.
Does a pebble style finish feel rough?
It has more texture than smooth plaster, but the pebbles are worn smooth rather than sharp, so it reads as a gentle textured surface underfoot. Some owners like the grip around steps and benches, and others find it less comfortable for long barefoot time.
Can I get a pebble style finish in a light color?
Yes. The tone range runs from pale sand through mid tones to near black, so you are not locked into a dark pool.
How do I know my pool is ready for this finish?
If the surface is past 10 to 15 years, shows the shell through worn plaster, or has scale and staining that will not lift, it may be time. Send the form, and someone from our team will call you back to go over your pool.
Does the cost change by pool size?
Yes. A national 2026 cost guide calls pool size one of the most direct cost drivers, and the cost estimator gives you a range built around your pool's size.
What happens to the old surface?
The old finish is chipped out or prepped so the new pebble style layer can take to the shell, and that prep is included in the written plan and price you get before anything starts.
Keep reading
- Quartz pool resurfacing: A quartz pool finish for a Phoenix pool mixes colored quartz crystals into the plaster, and the result changes what you get underfoot and in the water:
- Pool plastering and replastering: Plaster is the classic Phoenix pool finish, and a fresh coat changes the whole pool:
- Pool remodeling: A remodel goes past the finish and reworks the parts of the pool you see and touch every day:
- Service areas
