Costs · Phoenix, AZ
What pool resurfacing costs in Phoenix, AZ
Pool resurfacing cost in Phoenix runs about $6,000 to $16,000 depending on the finish, according to a 2026 Arizona pool cost guide: standard plaster runs $6,000 to $10,000 per pool, and a pebble style finish runs $9,000 to $16,000. Nationally, 2026 cost data puts the average resurfacing job at $11,000, with most homeowners paying $6,000 to $15,000. Jobs that add tile and coping are priced as a larger scope. Published 2026 cost data for Phoenix puts the average pool remodel at $9,331, with most homeowners paying $5,732 to $12,976; that is a separate data set covering upgrades such as resurfacing, deck work and water features.
See price rangesCosts
Cost by pool size
| Pool size | Average resurface cost (national 2026 data) |
|---|---|
| 6 by 8 ft | about $320 |
| 8 by 20 ft | about $1,100 |
| 16 by 32 ft | about $3,400 |
| 18 by 36 ft | about $4,200 |
| 20 by 40 ft | about $5,200 |
These figures follow national 2026 cost data, which puts basic resurfacing at around $6.50 per square foot, roughly $6,500 per 1,000 square feet for a concrete pool. A custom pool design, unique angles, or tile and coping work added at the same time can raise the total, and the same data notes that demand in warm climates can push costs up. The Arizona ranges below come from a separate 2026 guide.
Costs
Cost by finish type
| Finish | Arizona cost range | Typical lifespan here |
|---|---|---|
| Standard plaster | $6,000 to $10,000 | 10 to 15 years |
| Pebble style | $9,000 to $16,000 | 15 to 25 years |
| Quartz aggregate | Usually between plaster and pebble | Usually between plaster and pebble |
A 2026 Arizona pool cost guide says intense UV and hard water make plaster fail faster here than in milder climates, and that over 20 years, 2 plaster resurfaces usually cost as much as or more than 1 pebble style finish.
Costs
What moves the price
- Material rate per square foot. Resurfacing with aggregate (pebble style) runs about $6,500 per 1,000 square feet nationally; replastering runs about $5,500 per 1,000 square feet; tile refinishing runs about $30,000 per 1,000 square feet.
- Labor. $45 to $65 per hour, on top of material cost.
- Drain, clean and refill. About $175 to $225 to drain, about $250 to clean and roughly $55 per 5,000 gallons to refill.
- Chip-out versus light prep. A full chip-out, removing the old finish down to the shell, adds cost over a simple light-prep resurface.
- Added scope. Waterline tile and coping added at the same time add to the scope and the price.
Good to know
Run your own numbers
The ranges above are published averages. Your exact pool, finish choice and condition move the number up or down. Use the 3-step cost estimator to get a range for your specific pool, or compare plaster, quartz and pebble to decide which finish fits your budget.
Costs
Why pool size alone does not set the price
Two pools of the same square footage can land in different parts of a cost range because of access and condition, not just size. National 2026 cost data notes that a pool that is hard to reach can cost more in labor. A shell with existing cracks or widespread delamination may need the full chip-out scope described above rather than light prep, which adds both material and labor cost.
Timing
Financing and timing considerations
An older shell may need the full chip-out scope, which adds cost over light prep. Weather can lengthen a job too: national 2026 cost data says a resurface takes 5 to 7 days, and up to 14 days in an area prone to bad weather, which is one reason to plan around the June 15 to September 30 monsoon window.
4 questions
Questions people ask
Still have a question? Call (747) 243-2089 and say what your pool is doing.
Is $11,000 what I should expect to pay in Phoenix?
That is the national 2026 average for pool resurfacing, and most homeowners nationally pay $6,000 to $15,000. Your actual price depends on pool size, the finish you choose, and whether tile or coping work is added. Smaller pools and plaster finishes often cost less; larger pools with pebble style finishes or added tile typically cost more.
Why does pebble style cost more than plaster?
Pebble style uses aggregate, which costs more per square foot than plaster: a 2026 Arizona pool cost guide puts plaster at roughly $4 to $6 per square foot and pebble at $8 to $12. Pebble style also lasts longer in that guide, 15 to 25 years against 10 to 15 for plaster, which can make the higher upfront cost worth weighing.
Does this price include draining and refilling the pool?
Published ranges list it as an additional cost. National 2026 cost data says to budget an additional $425 to $475 for draining, refilling and cleaning before work begins.
Are these prices specific to my pool?
These are published averages. The cost estimator builds a range closer to your pool, and the final price is set in writing once the pool has been seen in person.
